Latency Tests
<<< PreviousChapter 5. ScenariosNext >>>Blog

5.3. Test Scenario 2 (TS2)

TS2 was designed to be a reasonable load an application might run against. Four additional serial ports were added to the target machine through the use of the PC104 4i68 add-on card.

5.3.1. Host

Table 5-3. TS2 Host

ComponentParametersInstancesFrequencyPayload
httpblast.sh�12/min10 KB
latency-server/dev/ttyS0 infifo -p500000 -i 3000 -l logfile &1��
echo"{00000000111111111122222222223333333333444444444455555555556666}" > infifo1��

5.3.2. Target

Table 5-4. TS2 Target

ComponentParametersInstancesFrequencyPayload
udpblasthost IP1100/second8 bytes
serialblast/dev/ttySN112/second100 bytes
latency-client/dev/ttyS7[a] 1010 drones��
Notes:
a. this serial port is from the 4i63 board and not an on-board serial port

This is easy to setup. Be sure to install the 4i68 serial board before booting the computer. 

# TS-target.sh <host IP> <serial device connected to host>

<<< PreviousHomeNext >>>
Test Scenario 1 (TS1)UpTest Scenario 3 (TS3)